• Compatible with Nikon i-TTL
• Nissin Air 2.4 GHz Radio TTL System
• Wireless TTL with Di700A Flash
• Triggering Range: 98'
• 8 Channels and 3 Groups (A, B, C)
• Flash Sync Speed up to 1/8000 Second
• Manual Zoom Adjustment from 24-200mm
• Manual Power Adjustment from 1/1-1/128
• Colour LED Control Panel & AF Assist Beam
• Wireless Slave TTL Functionality
• Hot Shoe & PC Sync Terminal
• Foot with 1/4"-20 Thread; Flip-Out Stand

Free yourself from cables and the line-of-sight demanding optical slave modes with the Nissin Air 1 Commander, featuring the Nissin Air System with 2.4 GHz radio transmission for wireless master TTL control over NAS-compatible flash units such as the Di700A. This unit is compatible with Canon cameras that utilize E-TTL / E-TTL II metering and offers a triggering range of up to 98'. Also, it features eight channels and three groups for setting up numerous flashes with different settings and modes, all from the commander unit.

High-speed sync is supported with a maximum sync speed of 1/8000 second along with compatibility for 1st & 2nd curtain sync modes. The zoom setting of the flash can also be manually adjusted from 24-200mm, along with the power from 1/1 to 1/128. The Air 1 features a colour LED control panel to view settings and make adjustments as well as an AF assist beam for focusing in low light conditions. Additionally, it runs on 2 AAA batteries.

• Capable of firing flash at a rate of 10 flashes per second
• Battery life of about 3000 flashes
• Exposure compensation support from -2 to +2 EV in 1/2 EV steps
• AF assist light has range of 2.3 - 19.7'

Bring all of your TTL flashes into the Nissin Air System with 2.4 GHz radio transmission by mounting them to the Air R Receiver. Using an Air 1 Commander and the Air R Receiver, photographers can now set up and control numerous flashes in an off-camera setup at distances up to 98'. The receivers add wireless slave TTL functionality with support for high-speed sync up to 1/8000 second, manual power control, and manual zoom, with the ability to select between 8 channels and organize 3 groups.

Connecting to a TTL flash is simple as the receiver has a hot shoe on the top for communication. For strobes and manual flashes, the Air R also has a PC sync terminal for basic connections. Mounting the receiver is simple as well with a cold foot on the bottom with a 1/4"-20 thread for stands. There is also a flip-out stand for placing directly on a flat surface. Additionally, it runs on 2 AAA batteries.